EVAtech 140S/4

About
Evatech is a range of crosslinkable and expandable compounds based on EVA, designed for the footwear segment and technical products&&

Product Description
Generic	EVA
Material Status	Commercial: Active
Features	Crosslinked,Foaming performance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.320 to 0.380	g/cm³	ISO 1183
Shrinkage rate
70℃，24 hrs	< 5.0	%

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion	140	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s C	59 to 65		ASTM D2240
Shore A, 15 seconds	43 to 47		ISO 868
abrasion resistance	< 230	mm³	EN 12770

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.