| About |
|---|
| EVATHENE UE612-04 is an ethylene-vinyl acetate copolymer (EVA) which possesses superb characteristics, included: flexibility , excellent adhesion, good low temperature resistance, good compatibility, thermal stability and non-toxicity.&& |
| Product Description | |
|---|---|
| Supplier | USI |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good bond,Copolymer,Nontoxicity,Heat Stabilized,Low temperature strength |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.937 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 150 | g/10min | ASTM D1238 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 5.20 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 350 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 82 | ℃ | ASTM D4591 |
| Vicat Softening Temp | |||
| 47 | ℃ | ASTM D1525 | |
| Embrittlement temperature | －40 | ℃ | ASTM D746 |
| Linear coefficient of thermal expansion |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |