EVATHENE® UE630

About
EVATHENE UE630 is an ethylene-vinyl acetate copolymer(EVA) resin possessing manifold of excellent characteristics including flexibility, elasticity, transparency, non-toxicity, good resistance to environmental stress cracking, low temperature flexibility. The characteristics of EVATHENE UE630 which permit its use for developing new applications and substituting for flexible PVC, rubbers and other elastomers. One of the applications is the incorporation of foaming agents, crosslinking agents and inorganic fillers with EVATHENE UE630 for compression molding of foamed mid-sole material for shoes. EVATHENE UE630 is extruded to sheet such as casting and co-extrusion for special packaging of hospital and medical materials, food packaging and other packaging.&&

About

EVATHENE UE630 is an ethylene-vinyl acetate copolymer(EVA) resin possessing manifold of excellent characteristics including flexibility, elasticity, transparency, non-toxicity, good resistance to environmental stress cracking, low temperature flexibility. The characteristics of EVATHENE UE630 which permit its use for developing new applications and substituting for flexible PVC, rubbers and other elastomers. One of the applications is the incorporation of foaming agents, crosslinking agents and inorganic fillers with EVATHENE UE630 for compression molding of foamed mid-sole material for shoes. EVATHENE UE630 is extruded to sheet such as casting and co-extrusion for special packaging of hospital and medical materials, food packaging and other packaging.&&

Product Description
Supplier	USI
Generic	EVA
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good flexibility,High elastic,Food contact compliance,Low temperature toughness,Copolymer,Nontoxicity,High ESCR
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.937	g/cm³	ASTM D1505
Melt Flow Rate	1.5	g/10min	ASTM D1238
Vinyl acetate content	16.0	wt%

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	67.0	℃	ASTM D1525
Melting peak temperature	89.0	℃	ASTM D3418

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	37		ASTM D2240
tensile strength
fracture	16.7	MPa	ASTM D638
Tensile strain
fracture	700	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.