EVERCAP™ DMDA-1220 NT 7

About
EVERCAP™ DMDA-1220 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding one-piece closure application needs. It is intended for use in compression molded one-piece closures designed for carbonated soft drinks, pressurized water and alternative beverages where sterilization processes such as hot fill and aseptic processes are used. EVERCAP™ DMDA-1220 delivers a combination of improved properties such as improved stiffness, improved ESCR, higher heat deflection temperature, and consistent processing. EVERCAP™ DMDA-1220 offers the ability to light-weight closures to meet the ongoing trend by industry for improved sustainability. Targeted Applications and Product Characteristics: Compression Molded One-Piece Light Weight CSD, Pressurized Water and Alternative Beverage Closures Excellent Stiffness, ESCR, and Impact Strength Excellent Sensory Properties Excellent Processing Characteristics High Heat Deflection Temperature Complies with: U.S. FDA 21 CFR 177.1520(c)3.2a Europe Commission Regulation (EU) No 10/2011 HPFB (Canada), No Objection Consult the regulations for complete details.&&

About

EVERCAP™ DMDA-1220 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding one-piece closure application needs. It is intended for use in compression molded one-piece closures designed for carbonated soft drinks, pressurized water and alternative beverages where sterilization processes such as hot fill and aseptic processes are used. EVERCAP™ DMDA-1220 delivers a combination of improved properties such as improved stiffness, improved ESCR, higher heat deflection temperature, and consistent processing. EVERCAP™ DMDA-1220 offers the ability to light-weight closures to meet the ongoing trend by industry for improved sustainability. Targeted Applications and Product Characteristics: Compression Molded One-Piece Light Weight CSD, Pressurized Water and Alternative Beverage Closures Excellent Stiffness, ESCR, and Impact Strength Excellent Sensory Properties Excellent Processing Characteristics High Heat Deflection Temperature Complies with: U.S. FDA 21 CFR 177.1520(c)3.2a Europe Commission Regulation (EU) No 10/2011 HPFB (Canada), No Objection Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.28	g/10min
190℃，21.6kg	27	g/10min
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 10% non-ionic surfactant, F50	220	hr
50 ℃, 100% non-ionic surfactant, F50	> 1100	hr

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-60.0	℃	ASTM D746
Vicat Softening Temp	131	℃	ASTM D1525

Supplementary information	Nominal value	Unit	Test method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	59		ASTM D2240
tensile strength
yield	24.8	MPa
fracture	29.0	MPa
Tensile strain
yield	3.7	%
fracture	800	%
Bending modulus
2% secant	1170	MPa	ASTM D790-B

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.