Evolue™ SP2320

About
Evolue™ SP2320 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP2320 include film, agricultural, coating applications and industrial applications. Characteristics include: Clarity Fast Molding Cycle Good Sealability&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Clarity,Quick molding cycle,Low temperature heat sealing
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	1.9	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)	> 1000	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	无断裂		ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	101	℃	ISO 306
Melting temperature	118	℃	ISO 11357-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	55		ISO 868
tensile strength
Fracture, injection molding	19.0	MPa	ISO 527-2
Tensile strain
Fracture, injection molding	350	%	ISO 527-2
Bending modulus
injection molding	240	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.