| About |
|---|
| Exceed™ XP 6056ML is an eXtreme Performance linear low density polyethylene 1-hexene copolymer that is especially designed to have good melt strength and excellent tensile, impact, and puncture properties. The combination of high toughness, melt stability and good sealing performance makes this grade a versatile blown film resin. Exceed™ XP 6056ML – when eXtreme Performance matters.&& |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | PE copolymerization |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.916 | g/cm³ | ExxonMobil Method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.50 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| 1% secant, MD | 164 | MPa | |
| 1% secant, TD | 200 | MPa | |
| tensile strength | |||
| MD, yield | 8.72 | MPa | |
| TD, yield | 9.47 | MPa | |
| MD, fracture | 58.9 | MPa | |
| TD, fracture | 59.1 | MPa | |
| Tensile strain | |||
| MD, fracture | 390 | % | |
| TD, fracture | 710 | % | |
| Drop hammer impact | 510 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 81 | g | |
| TD | 460 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 59 | ASTM D2457 | |
| Haze | 7.1 | % | ASTM D1003 |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Dart Head Type C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |