| About |
|---|
| Exceed™ XP 8358 is an eXtreme Performance ethylene 1-hexene copolymer that offers step-out toughness, high flex-crack resistance and increased output with excellent bubble stability for a range of blown film applications. TnPP is not intentionally added to Exceed™ XP 8358. Exceed™ XP 8358 – when eXtreme Performance matters. |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | PE copolymerization |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.50 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| 1% secant, MD | 203 | MPa | |
| 1% secant, TD | 247 | MPa | |
| Tensile strength | |||
| MD: Yield | 9.70 | MPa | |
| TD: Yield | 10.3 | MPa | |
| MD: Fracture | 69.5 | MPa | |
| TD: Fracture | 54.6 | MPa | |
| Tensile strain | |||
| MD, fracture | 300 | % | |
| TD, fracture | 640 | % | |
| Drop hammer impact | 710 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 530 | g | |
| TD | 500 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 25 | ASTM D2457 | |
| Haze | 23 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |