| About |
|---|
| Applications: Bottles for Carbonated Soft Drink and Mineral Water. Characteristics: The Exelene resin PET IV 80 meets the requirements of section 177.1630, paragraph C, from chapter 21 denominated “Olefin Polymers” from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Food contact compliance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D1505 |
| Apparent density | 0.82 to 0.90 | g/cm³ | ASTM D1895 |
| Water absorption rate | |||
| saturated | < 0.30 | % | Karl Fisher |
| Acetaldehyde | < 1.0 | ppm | |
| Color b | < 1.00 | ||
| Intrinsic viscosity | 0.60 to 1.0 | dl/g | ASTM D4603 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 241 to 245 | ℃ | DSC |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |