Extir® CM Galileo Io 5

About
Extir CM is the new expandable products range produced with the new Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC. Extir CM PD Galileo Io 5 contains an atherman additive that reduces heat transfer, and the items produced with it, light grey in colour, have excellent thermal insulation properties. Its particular formula makes it more resistant to sunlight exposure than other products. Extir CM PD Galileo Io 5 does not contain flame retardant additives. Applications Extir CM Galileo Io 5 is used to produce blocks and items having a thickness higher than a few centimeters to be used for thermal insulation in buildings. Its thermal conductivity, strongly improved with respect to conventional products and its good mechanical strength make it apt for all applications in which fire resistance is not compuilsory, such as plasterboard/EPS panels (doublage) floor insulating elements&&

About

Extir CM is the new expandable products range produced with the new Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC. Extir CM PD Galileo Io 5 contains an atherman additive that reduces heat transfer, and the items produced with it, light grey in colour, have excellent thermal insulation properties. Its particular formula makes it more resistant to sunlight exposure than other products. Extir CM PD Galileo Io 5 does not contain flame retardant additives. Applications Extir CM Galileo Io 5 is used to produce blocks and items having a thickness higher than a few centimeters to be used for thermal insulation in buildings. Its thermal conductivity, strongly improved with respect to conventional products and its good mechanical strength make it apt for all applications in which fire resistance is not compuilsory, such as plasterboard/EPS panels (doublage) floor insulating elements&&

Product Description
Generic	PS (EPS)
Material Status	Commercial: Active
Features	Good Rigidity,Thermal insulation,Weather resistance is good,Good surface appearance,Foaming performance,Low contractility
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.0120 to 0.0250	g/cm³
Apparent density
—	0.59 to 0.63	g/cm³
—	0.02	g/cm³
—	0.01	g/cm³
Particle size	0.900 to 1.60	mm

Notes
1. Typical properties: these are not to be construed as specifications.
2. on a continuous pre-expander after two expansions
3. on a discontinuous pre-expander
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.