Extir® EH 5000

About
Extir EH 5000 is an expandable polystyrene in the form of spherical beads of medium-large particle size, with a low pentane content as blowing agent. Extir does not contain CFC or HCFC. This grade is used for the very fast cycle production of large shape mouldings and block moulding over a wide density range. It is characterised by a very short maturing time, even at high density, excellent moulding processability, good fusion, good surface finishing and very good dimensional stability. Extir EH 5000 is a very fast cycling grade used for production of large, thick section mouldings. It can also be used for the production of medium / high density blocks. Finished products exhibit high fusion, high resistance to impact / mechanical stress, and an outstanding dimensional stability. Typical applications are: large sized or special industrial packaging packaging with excellent cushioning properties for electronic items internal shells for crash helmets medium / high density blocks for thermal insulation&&

About

Extir EH 5000 is an expandable polystyrene in the form of spherical beads of medium-large particle size, with a low pentane content as blowing agent. Extir does not contain CFC or HCFC. This grade is used for the very fast cycle production of large shape mouldings and block moulding over a wide density range. It is characterised by a very short maturing time, even at high density, excellent moulding processability, good fusion, good surface finishing and very good dimensional stability. Extir EH 5000 is a very fast cycling grade used for production of large, thick section mouldings. It can also be used for the production of medium / high density blocks. Finished products exhibit high fusion, high resistance to impact / mechanical stress, and an outstanding dimensional stability. Typical applications are: large sized or special industrial packaging packaging with excellent cushioning properties for electronic items internal shells for crash helmets medium / high density blocks for thermal insulation&&

Product Description
Generic	PS (EPS)
Material Status	Commercial: Active
Features	Good Rigidity,Thermal insulation,Excellent Processability,Good surface appearance,High impact resistance,Good Dimensional Stability,Foaming performance,Quick molding cycle,Food contact compliance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.0170 to 0.0800	g/cm³
Apparent density
—	0.02	g/cm³
—	0.59 to 0.63	g/cm³
Particle size	1.00 to 2.00	mm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.