ExxonMobil™ HDPE HD 6908 Series

About
HD 6908 is a homopolymer with outstanding stiffness with a good balance of processability and cold temperature impact performance. This resin is ideally suited for articles requiring very high stiffness or enable down-gauging. This material offers excellent performance in structural foam articles.&&

Product Description
Supplier	ExxonMobil
Generic	Ultra-high molecular weight polyethylene
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
190℃，2.16kg	8.2	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F50	3.33	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	30.0	MPa	ASTM D638
Bending modulus			ASTM D790B
1% secant	1890	MPa	ASTM D790-B
2% secant	1600	MPa	ASTM D790-B

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
-40℃	47	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	87.1	℃	ASTM D648
1.8 MPa, unannealed	48.5	℃	ASTM D648-B
Melting peak temperature	135	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.