| About |
|---|
| LL 1002BU is a butene LLDPE designed for the blown film process, offering high gloss and excellent draw down. Films made from LL1002BU have very good tensile and toughness properties. LL 1002BU is TNPP-free.&& |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ExxonMobil Method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| 1% secant, TD | 220 | MPa | ASTM D882 |
| tensile strength | |||
| MD, yield | 9.40 | MPa | |
| TD, yield | 8.90 | MPa | |
| MD, fracture | 49.0 | MPa | |
| TD, fracture | 29.0 | MPa | |
| Tensile strain | |||
| MD, fracture | 590 | % | |
| TD, fracture | 800 | % | |
| Drop hammer impact | 70 | g | ASTM D1709-A |
| Elmandorf tear strength | |||
| MD | 90 | g | |
| TD | 400 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 76 | ASTM D2457 | |
| Haze | 4.4 | % | ASTM D1003 |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |