| About |
|---|
| ExxonMobil™ LLDPE LL1002xKW is a Linear Low Density Polyethylene Resin product. It is available in Latin America or North America. Characteristics include: Antiblock Heat Stabilizer Slip&& |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| 1% secant, TD | 220 | MPa | ASTM D882 |
| tensile strength | |||
| MD, yield | 9.40 | MPa | |
| TD, yield | 8.90 | MPa | |
| MD, fracture | 49.0 | MPa | |
| TD, fracture | 29.0 | MPa | |
| Tensile strain | |||
| MD, fracture | 590 | % | |
| TD, fracture | 800 | % | |
| Drop hammer impact | 70 | g | ASTM D1709-A |
| Elmandorf tear strength | |||
| MD | 90 | g | |
| TD | 400 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 76 | ASTM D2457 | |
| Haze | 4.4 | % | ASTM D1003 |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |