| About |
|---|
| A homopolymer resin that meets certified requirements for use in Medical and Pharmaceutical applications.&& |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Low extract,Steam sterilized,High pressure disinfection,Ethylene oxide disinfection |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 7.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 68 | ISO 868 | |
| Tensile modulus | 1570 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 34.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 9.3 | % | ISO 527-2/50 |
| Bending modulus | 1350 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23 ℃, completely fractured | 3.6 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | |||
| 23 ℃, completely fractured | 3.1 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 52.3 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 85.7 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| A50 | 153 | ℃ | ISO 306/A50 |
| Melting temperature | 160 | ℃ | ISO 11357-3 |
| Crystallization peak temperature | 113 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |