| About |
|---|
| A highly clarified random copolymer resin designed for injection molding of medical devices suitable for sterilization by high energy radiation.&& |
| Product Description | |
|---|---|
| Supplier | ExxonMobil |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Controllable rheological,Gamma radiation,E-beam disinfection,Radiation disinfection,Ethylene oxide disinfection |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 24 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 66 | J/m | ASTM D256-A |
| Drop hammer impact | |||
| 23℃，3.2 mm | 23.6 | J | ASTM D5420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 75.1 | ℃ | ASTM D648 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 8.6 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 32.8 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 13 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 1050 | MPa | ASTM D790-A |
| Rockwell hardness | 93 | ASTM D785 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 3. 0.051 in/min |
| 4. Geometry GC |
| 5. 0.04 injection molded plaque |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |