| About |
|---|
| Fainplast PVC GS 60是一种聚氯乙烯产品,。 它可以通过注射成型进行加工,在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货。 典型应用领域为:生活消费品。&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16-1.20 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 56-60 | ISO 868 | |
| tensile strength | |||
| 23℃ | 8.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| 23 ℃, fracture | 400 | % | ISO 527-2 |
| abrasion | 135 | mm³ | DIN 53516 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | |||
| Low temperature bending | -40.0 | ℃ | ISO 458/2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60-80 | °C | |
| Drying time | 2.0-6.0 | Hr | |
| Recommended moisture content | <=0.20 | % | |
| Barrel rear temperature | 130-180 | °C | |
| Barrel middle temperature | 140-190 | °C | |
| Barrel front temperature | 150-200 | °C | |
| Nozzle temperature | 160-210 | °C | |
| Mold temperature | 20-80 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |