Fasal® BIO 322

About
Fasal BIO 322 is a wood based material for injection moulding applications.&&

Product Description
Generic	生物可降解聚合物
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.28	g/cm³	ISO 1183
Biomass content	100	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	4930	MPa	ISO 527-2
tensile strength
fracture	51.5	MPa	ISO 527-2
Tensile strain
fracture	1.3	%	ISO 527-2
Bending modulus	4640	MPa	ISO 178
bending strength	78.9	MPa	ISO 178
Bending strain	1.2	%	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	8.7	kJ/m²	ISO 179/1fU

Supplementary information	Nominal value	Unit	Test method
Renewable Content	100	%

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	70	°C
Drying time	4.0	hr
Barrel rear temperature	170	°C
Barrel middle temperature	180	°C
Barrel front temperature	180	°C
Nozzle temperature	190	°C
Mold temperature	10 to 30	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.