Favorite LL660

About
LL660 is a blend of LLDPE and MMW-HDPE which provides good stiffness and physical properties.&&

Product Description
Generic	LLDPE+MMW-HDPE
Material Status	Commercial: Active
Features	Good Rigidity
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.950	g/cm³	ASTM D1505

MECHANICAL	Nominal value	Unit	Test method
friction coefficient	0.25		ASTM D1894

film	Nominal value	Unit	Test method
film thickness
test	43	µm
tensile strength
MD, fracture, 43 µ m	37.2	MPa	ASTM D882
Tensile strain
MD, fracture, 43 µ m	550	%	ASTM D882
Drop hammer impact
43 µm	100	g	ASTM D1709

optical performance	Nominal value	Unit	Test method
gloss
45°，43.2 µm	5		ASTM D2457
Haze
43.2 µm	66	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.