| About |
|---|
| Product Description | |
|---|---|
| Supplier | Audia |
| Material Status | Commercial: Active |
| Features | Elastic,High scratch resistance |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | 61 | Shore A | ASTM D2240 |
| Tensile Strength | 8.2 | MPa | ASTM D412 |
| Tensile Stress | |||
| 100% | 1.3 | MPa | ASTM D412 |
| 300% | 2.4 | MPa | ASTM D412 |
| Elongation at Break | 780 | % | ASTM D412 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Specific Gravity | 0.88 | ASTM D792 |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| drying temperature | 70-80 | ℃ | |
| Drying time | 2 | hr | |
| Temperature of material cylinder zone 1 | 190-210 | ℃ | |
| Temperature of Material Barrel-2 Zone | 200-220 | ℃ | |
| Temperature of material cylinder zone 3 | 210-230 | ℃ | |
| Temperature of cylinder 4 zone | 210-230 | ℃ | |
| Melt Temperature | 250 | ℃ | |
| Mold temperature | 20-60 | ℃ | |
| Injection pressure | 60-80%Max Pressure | ||
| Injection speed | 60-80% Max Speed | ||
| Maintain pressure | 40-60% Max Pressure | ||
| Screw speed | 40-80 | rpm | |
| Back pressure | 10-30% Max Pressure | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |