| About |
|---|
| DESCRIPTION: EPDM based compound FEATURES: chemical resistant, heat resistant, weatherable, UV resistant APPLICATIONS: extrusion, profiles, window seals, outdoor applications&& |
| Product Description | |
|---|---|
| Generic | EPDM+SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Heat Resistance, Good,Solvent resistance,Terpolymer |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.928 to 0.968 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.50 to 1.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 40 to 48 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 3.10 | MPa | ASTM D412 |
| 300% strain | > 2.41 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | > 900 | % | ASTM D412 |
| Compression deformation | |||
| 70℃，22 hr | 40 to 45 | % | ASTM D395B |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 170 to 210 | °C | |
| Barrel 3 zone temperature | 170 to 210 | °C | |
| Barrel 5 zone temperature | 170 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |