Felix Compounds Mica

About
Reinforced thermoplastic compounds are products that have excellent mechanical, physical and thermal properties. Their rigidity, resistance to shock and scratches, to chemical products and UV rays, as well as the ease of transformation of the material through molding, are but a few points to take into consideration in the choice of the material that will correspond to the requirements of your application: polypropylene (PP), polystyrene (PS), polyethylene (PE), different mineral charges (CaCO3, talc, mica) and other materials (glass fibre). Mica For this category of products, it is easy to obtain good mechanical properties as well as surface finishes that imitate natural marble. The color and size of mica is up to the customer.&&

About

Reinforced thermoplastic compounds are products that have excellent mechanical, physical and thermal properties. Their rigidity, resistance to shock and scratches, to chemical products and UV rays, as well as the ease of transformation of the material through molding, are but a few points to take into consideration in the choice of the material that will correspond to the requirements of your application: polypropylene (PP), polystyrene (PS), polyethylene (PE), different mineral charges (CaCO3, talc, mica) and other materials (glass fibre). Mica For this category of products, it is easy to obtain good mechanical properties as well as surface finishes that imitate natural marble. The color and size of mica is up to the customer.&&

Product Description
Generic	PP+PE
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958 to 1.37	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	10 to 25	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	13.8 to 24.1	MPa	ASTM D638
Bending modulus	1380 to 2410	MPa	ASTM D790B

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	59 to 130	J/m	ASTM D256-A

Supplementary information	Nominal value	Unit	Test method
Filler	5.0 to 50	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.