Fenochem T 3800/S

About
Colour : black Reinforcement : mineral flour/wood flour Application areas : parts for electrical technology, mounting parts, technical pieces Mark : DIN 31/1549&&

Product Description
Generic	酚醛树脂
Material Status	Commercial: Active
Features	Renewable resources,High Heat Resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.50	g/cm³	ISO 1183
Shrinkage rate			ISO 2577
—	0.50 to 0.70	%	ISO 2577
—	0.40 to 0.60	%	ISO 2577
Water absorption rate	< 100.0	mg	ISO 62

MECHANICAL	Nominal value	Unit	Test method
bending strength	> 60.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	> 1.5	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	> 4.0	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	> 140	℃	ISO 75-2/A

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+9	ohms	IEC 60093
Volume resistivity	> 1.0E+10	ohms·cm	IEC 60093
Compared to the leakage tracing index	> 175	V	IEC 60112

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level			IEC 707

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.