| About |
|---|
| FERREX® GPP35CN is a Polypropylene product filled with 36% calcium carbonate. It is available in Latin America or North America. Typical application: Household Applications. Characteristics include: Good Processability High Gloss Impact Resistant&& |
| Product Description | |
|---|---|
| Supplier | Ferro |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good surface appearance,High impact resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| TD | 1.40 | % | ASTM D995 |
| MD | 1.20 | % | ASTM D995 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 21 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 24.10 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 33 | % | ASTM D638 |
| bending strength | |||
| 23℃ | 42.10 | MPa | ASTM D790 |
| Bending modulus | |||
| 23℃ | 2410 | MPa | ASTM D790 |
| Drop hammer impact | 5.65 | J |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 60 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 107 | ℃ | ASTM D648 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 26.70 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 534 | J/m | ASTM D256 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60-90 | °C | |
| Drying time | 2.0-6.0 | Hr | |
| Recommended moisture content | <=0.20 | % | |
| Barrel rear temperature | 200-260 | °C | |
| Barrel middle temperature | 210-270 | °C | |
| Barrel front temperature | 220-280 | °C | |
| Nozzle temperature | 230-290 | °C | |
| Mold temperature | 20-90 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |