| About |
|---|
| Ferro PP CPP45GH02AL是一种聚丙烯材料,含有的填充物为45% 矿物填料。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,加工方式为:注射成型。 Ferro PP CPP45GH02AL的主要特性有: 低收缩性 良好的尺寸稳定性 耐冲击&& |
| Product Description | |
|---|---|
| Supplier | Ferro |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good Dimensional Stability,Low contractility |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.32 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 16 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.80 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 73 | ASTM D2240 | |
| tensile strength | |||
| yield | 24.8 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 10 | % | ASTM D638 |
| Bending modulus | 2900 | MPa | ASTM D790 |
| bending strength | |||
| yield | 42.7 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 310 | J/m | ASTM D256 |
| 23℃ | 21 | J/m | ASTM D256 |
| Drop hammer impact | 5.65 | J | ASTM D3029 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 73.3 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 123 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 93 | °C | |
| Drying time | 2.0 to 3.0 | hr | |
| Barrel rear temperature | 202 to 204 | °C | |
| Barrel middle temperature | 204 to 210 | °C | |
| Barrel front temperature | 210 to 213 | °C | |
| Nozzle temperature | 213 to 218 | °C | |
| Mold temperature | 43 to 52 | °C | |
| Back pressure | 0.345 to 0.689 | MPa | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |