FHR Polypropylene P5M6N-058A

About
DESCRIPTION: Random copolymer for injection molding. FEATURES: Nucleated and antistatic agent. Produced without animal derived components or phthalates. APPLICATIONS: Consumer products, food packaging.&&

Product Description
Supplier	INVISTA
Generic	PP copolymer
Material Status	Commercial: Active
Features	Nucleation,Antistatic property,ADCF,Random copolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	35	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	52	J/m	ASTM D256
Drop hammer impact
23℃	> 36.2	J	ASTM D5420

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648
Melting peak temperature	145 to 152	℃	ASTM D3418

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	26.9	MPa	ASTM D638
Tensile strain
yield	11	%	ASTM D638
Bending modulus			ASTM D790
1% secant	986	MPa	ASTM D790
tangent	1060	MPa	ASTM D790
Rockwell hardness
R-level	80		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.