Fiberfil® PP-60/TC/20/FD

About
Fiberfil® PP-60/TC/20/FD is a Polypropylene Homopolymer (PP Homopolymer) product filled with 20% talc. It is available in North America. Typical application: Food Contact Applications. Primary characteristic: homopolymer.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Homopolymer
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	10	g/10min	ASTM D1238
Shrinkage rate			ASTM D955
MD：3.2 mm	1.0	%
MD：6.35 mm	1.2	%
Water absorption rate
24hr	0.030	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	27	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	132	℃
1.8 MPa, unannealed	82.2	℃

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	90 to 95		ASTM D785
Tensile modulus
23℃	2550	MPa	ASTM D638
tensile strength
23℃	34.5	MPa	ASTM D638
Tensile strain
Yield, 23 ℃	20	%	ASTM D638
Bending modulus
Tangent, 23 ℃	2340	MPa	ASTM D790
bending strength
23℃	48.3	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.