| About |
|---|
| Fibremod GD302HP is a 30 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness and is easy to process. Applications Fibremod GD302HP has been developed especially for the automotive industry. Dashboard carriers Structural seat parts Door module carriers Special Features High impact strength&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,High impact resistance,Renewable resources,Chemical coupling |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.3 | g/10min | ISO 1133 |
| Shrinkage rate | Internal Method | ||
| TD：2.0 mm | 0.80 | % | Internal Method |
| MD：2.0 mm | 0.060 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| injection molding | 5600 | MPa | ISO 527-1-2 |
| tensile strength | |||
| Yield, injection molding | 65.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Yield, injection molding | 4.0 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 5100 | MPa | ISO 178 |
| bending strength | |||
| injection molding | 86.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20 ℃, injection molding | 13 | kJ/m² | ISO 179/1eA |
| 23 ℃, injection molding | 24 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -20 ℃, injection molding | 60 | kJ/m² | ISO 179/1eU |
| 23 ℃, injection molding | 65 | kJ/m² | ISO 179/1eU |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -20 ℃, injection molding | 16 | kJ/m² | ISO 180-1A |
| 23 ℃, injection molding | 28 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 132 | ℃ | ISO 75-2/A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 230 to 280 | °C | |
| Mold temperature | 30 to 50 | °C | |
| Hold pressure | 30.0 to 60.0 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |