FireCon™ CPE 1240 UV RoHS NATURAL

About
An excellent choice for low-voltage power-and-cable control cables, this RoHS compliant filled, flexible thermoplastic CPE jacketing compound offers wire and cable manufacturers the advantages of thermoplastic extrusion processing without the need to invest in continuous vulcanization (CV) equipment. CPE 1240 UV RoHS Natural is excellent for larger-diameter cable. This compound passes testing for heat/shock resistance, which requires cable to withstand being bent and twisted without cracking or showing stress. Good moisture, oil, and electrical properties. Applications include power-and-control cable for fossil-fuel and co-generation plants.&&

Product Description
SupplierPolyone
GenericCPE
Material StatusCommercial: Active
FeaturesFlame Characteristics
AvailabilitysNorth America,Latin America,Asia Pacific
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density1.32g/cm³ASTM D792
exterior颗粒/立方体 ASTM D2090

Aging performanceNominal valueUnitTest method
The rate of change in tensile strength
70 ℃, 24 hours, in IRM 902 oil60%IEC 60811-2-1
Changes in tensile stress during fracture
70 ℃, 24 hours, in IRM 902 oil88%IEC 60811-2-1

FLAME CHARACTERISTICSNominal valueUnitTest method
Extreme oxygen index
1.91 mm33%ASTM D2863

MECHANICALNominal valueUnitTest method
Shore hardness
Shore D, 10 seconds48 ASTM D2240
Tensile modulus8.96MPaASTM D638
tensile strength
fracture16.5MPaASTM D638
Tensile strain
fracture500%ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
2. Type IV, 20 in/min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.