Firestone CL200-001

About
Firestone CL200-001 is a Polyamide 6 (Nylon 6) material. It is available in North America for extrusion or injection molding. Primary attribute of Firestone CL200-001: Lubricated.&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	Lubricating
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³	ASTM D792
Shrinkage rate
MD	1.3	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	83.0	MPa	ASTM D638
Tensile strain
fracture	60	%	ASTM D638
Bending modulus	2760	MPa	ASTM D790
bending strength	103	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	65.0	℃	ASTM D648
0.45 MPa, unannealed	180	℃	ASTM D648
Melting temperature	220	℃

Process Conditions
Extrusion	Nominal value	Unit	Test method
Recommended maximum moisture content	0.080	%
Barrel 1 zone temperature	249 to 260	°C
Barrel 3 zone temperature	254 to 266	°C
Barrel 4 zone temperature	254 to 266	°C
Barrel 5 zone temperature	260 to 271	°C
Melt temperature	260 to 271	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.