About |
---|
Flexalloy® 9602-72FR is a Polyvinyl Chloride Elastomer (PVC Elastomer) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Important attributes of Flexalloy® 9602-72FR are: RoHS Compliant Flame Retardant Good Flexibility Heat Resistant Sunlight Resistant Typical application of Flexalloy® 9602-72FR: Wire & Cable&& |
Product Description | |
---|---|
Supplier | Teknor Apex |
Generic | PVC elastomer |
Material Status | Commercial: Active |
Features | Weather resistance is good,Flame Characteristics,High Heat Resistance,Low temperature toughness |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.28 | g/cm³ | ASTM D792 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Continuous use temperature | 105 | ℃ | ASTM D794 |
Embrittlement temperature | -48.0 | ℃ | ASTM D746 |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Dielectric constant | ASTM D150 | ||
1 kHz | 6.16 | ASTM D150 | |
1 MHz | 4.10 | ASTM D150 | |
Dissipation factor | ASTM D150 | ||
1 kHz | 0.11 | ASTM D150 | |
1 MHz | 0.11 | ASTM D150 |
FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
---|---|---|---|
Extreme oxygen index | 29 | % | ASTM D2863 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shore A, 15 seconds | 72 | ASTM D2240 | |
tensile strength | |||
fracture | 13.3 | MPa | ASTM D638 |
Tensile strain | |||
fracture | 390 | % | ASTM D638 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |