Flexane® High Performance Putty

About
A tough, rubber-like urethane compound for making a broad range of repairs to protect against wear, abrasion, and noise reduction. Intended Use: Protect equipment surfaces from wear and abrasion. Protect processing equipment such as coating hoppers, lining chutes, pump volutes, impellers, and fan housings. Product features: Excellent tear resistance Mixes easily Bonds (with primers) to metal, concrete, rubber, wood, and fiberglass Highly resistant to impact and abrasion Trowels on smoothly&&

About

A tough, rubber-like urethane compound for making a broad range of repairs to protect against wear, abrasion, and noise reduction. Intended Use: Protect equipment surfaces from wear and abrasion. Protect processing equipment such as coating hoppers, lining chutes, pump volutes, impellers, and fan housings. Product features: Excellent tear resistance Mixes easily Bonds (with primers) to metal, concrete, rubber, wood, and fiberglass Highly resistant to impact and abrasion Trowels on smoothly&&

Product Description
Supplier	Devcon
Generic	PUR
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Good tear strength,Good wear resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Specific volume	0.849	cm³/g
Shrinkage rate
MD	12	%	ASTM D2566
Solid content
by Volume	88	%

elastic body	Nominal value	Unit	Test method
tensile strength	31.0	MPa	ASTM D412
Tensile strain
fracture	600	%	ASTM D412
tear strength	70.1	kN/m	ASTM D624

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	14	kV/mm	ASTM D149

Uncured Properties	Nominal value	Unit	Test method
Curing time	16	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	78		ASTM D2240
Wear amount	140	mg/1000 cycles

THERMAL	Nominal value	Unit
Maximum operating temperature
Dry	82	℃
Wet	49	℃
Thermosetting components
resin	按重量计算的混合比: 94
Hardening method	按重量计算的混合比: 6.0
storage stability
24 ℃	10	min
stripping time	600	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.