Flexiblend® PP-1200

About
Flexiblend® PP-1200 is a thermoplastic rubber modified polypropylene compound. This grade offers impact strength and thermal properties.&&

Product Description
Generic	PP+EPDM
Material Status	Commercial: Active
Features	Low liquidity,High impact resistance,Heat Stabilized,HB
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	1.3	g/10min	ASTM D1238
Shrinkage rate
MD：3.2 mm	1.0 to 1.4	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	22.0	MPa	ASTM D638
Tensile strain
fracture	450	%	ASTM D638
Bending modulus	640	MPa	ASTM D790
bending strength	24.0	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	630	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 4.0 mm	101	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	60 to 80	°C
Drying time	2.0 to 4.0	hr
Barrel rear temperature	190 to 200	°C
Barrel middle temperature	195 to 210	°C
Barrel front temperature	215 to 220	°C
Nozzle temperature	210 to 220	°C
Mold temperature	30 to 60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.