Flexirene® MS 40 U

About
Flexirene MS 40 U is a linear low density polyethylene (LLDPE) with antioxidants, suitable for injection moulding application. Parts made by Flexirene MS 40 U are characterised by a good balance between impact resistance and rigidity. Main Application Flexirene MS 40 U is recommended for the production of large sized articles, houseware and toys. Flexirene MS 40 U is characterized by a high flowability which make it ideal for masterbatches preparation for LDPE and LLDPE.&&

About

Flexirene MS 40 U is a linear low density polyethylene (LLDPE) with antioxidants, suitable for injection moulding application. Parts made by Flexirene MS 40 U are characterised by a good balance between impact resistance and rigidity. Main Application Flexirene MS 40 U is recommended for the production of large sized articles, houseware and toys. Flexirene MS 40 U is characterized by a high flowability which make it ideal for masterbatches preparation for LDPE and LLDPE.&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	High impact resistance,High liquidity,Food contact compliance,Inoxidizability,Low density
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	27	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	52		ISO 868
tensile strength
Fracture, injection molding	12.0	MPa	ISO 527-2
Yield, injection molding	11.0	MPa	ISO 527-2
Tensile strain
Fracture, injection molding	> 500	%	ISO 527-2
Bending modulus
injection molding	300	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	103	℃	ISO 306/A
Melting temperature	121	℃	Internal Method

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	160 to 210	°C
Barrel middle temperature	160 to 210	°C
Barrel front temperature	160 to 210	°C
Mold temperature	10 to 40	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.