Flontech® FT-1-8

About
100% repro PTFE&&

Product Description
Generic	PTFE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.14	g/cm³	ASTM D4894
Apparent density	0.93	g/cm³	ASTM D4894
Average particle size	930	µm	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	55		ASTM D2240
Rockwell hardness	31		ASTM D785
tensile strength
TD，1 mm	14.0	MPa	ASTM D4894
Tensile strain
TD, fracture, 1 mm	140	%	ASTM D4894

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.