Fluon® ETFE Film

About
Fluon® ETFE Film is an Ethylene Tetrafluoroethylene Copolymer (ETFE) product. It is available in North America. Typical application: Film. Primary characteristic: chemical resistant.&&

Product Description
Supplier	Asahi Glass
Generic	ETFE
Material Status	Commercial: Active
Features	Solvent resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.75	g/cm³	ASTM D792
Water absorption rate
balance	0.030	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
tensile strength	> 39.0	MPa	JIS K7127
Tensile strain
fracture	200 to 510	%	JIS K7127

THERMAL	Nominal value	Unit	Test method
Continuous use temperature	150 to 180	℃
Melting temperature	260	℃
Linear coefficient of thermal expansion
MD	9.4E-5	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+17	ohms·cm	ASTM D257
Dielectric strength	120	kV/mm	ASTM D149
Dielectric constant	2.60		ASTM D150
Dissipation factor			ASTM D150
60 Hz	6.0E-4		ASTM D150
1 kHz	8.0E-4		ASTM D150
1 MHz	5.0E-3		ASTM D150
1 GHz	0.010		ASTM D150
Arc resistance	120	sec	ASTM D495

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.