| About |
|---|
| Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point. Features: The melting point is 30-40 °C lower than that of conventional ETFE resin. Film with excellent transparency can be produced. Easier processing thanks to a wide window of possible processing.&& |
| Product Description | |
|---|---|
| Supplier | Asahi Glass |
| Generic | ETFE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,High Heat Resistance,Good tear strength,V-0 |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.78 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 297℃，5.0kg | 30 to 40 | g/10min | ASTM D3159 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 38.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 420 | % | ASTM D638 |
| Bending modulus | 647 | MPa | ASTM D790 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength retention rate | 88 | % | ASTM D638 |
| Elongation retention rate | 120 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 225 | ℃ | DSC |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | ASTM D150 | ||
| 1 kHz | 2.40 | ASTM D150 | |
| 1 MHz | 2.40 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 1 kHz | 7.0E-4 | ASTM D150 | |
| 1 MHz | 8.2E-3 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| Extreme oxygen index | 40 | % | ASTM D2863 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Heating reduction | |||
| 10% | 410 | ℃ | TGA |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |