About |
---|
Fluoraz FEPM 799是一种聚全氟乙烯-丙烯树脂 (FEP)产品,。 它,在北美洲有供货。&& |
Product Description | |
---|---|
Generic | FEP |
Material Status | Commercial: Active |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.65 | g/cm³ | ASTM D297 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s A | 90 | ASTM D2240 |
elastic body | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | |||
fracture | 20.7 | MPa | ASTM D412 |
100% strain | 18.1 | MPa | ASTM D412 |
Tensile strain | |||
fracture | 120 | % | ASTM D412 |
Compression deformation | ASTM D395 | ||
23℃,70 hr | 18 | % | ASTM D395 |
175℃,166 hr | 36 | % | ASTM D395 |
200℃,22 hr | 35 | % | ASTM D395 |
200℃,70 hr | 40 | % | ASTM D395 |
Aging performance | Nominal value | Unit | Test method |
---|---|---|---|
The rate of change in tensile strength in air | |||
276℃,70 hr | -48 | % | ASTM D573 |
The rate of change in ultimate elongation in air | |||
276℃,70 hr | -9.0 | % | ASTM D573 |
The rate of change in hardness of a hardness tester in the air | |||
276℃,70 hr | 2.0 | ASTM D573 | |
The rate of change in tensile strength | ASTM D471 | ||
135 ℃, 70 hr, in Ford ATF | -8.0 | % | ASTM D471 |
135 ℃, 70 hr, in MIL-H-5606 | -25 | % | ASTM D471 |
175 ℃, 70 hr, in Stauffer 7700 liquid | -24 | % | ASTM D471 |
Change rate of ultimate elongation | ASTM D471 | ||
135 ℃, 70 hr, in Ford ATF | 21 | % | ASTM D471 |
135 ℃, 70 hr, in MIL-H-5606 | 22 | % | ASTM D471 |
175 ℃, 70 hr, in Stauffer 7700 liquid | 28 | % | ASTM D471 |
The rate of change in Shore hardness | ASTM D471 | ||
135 ℃, 70 hr, in Ford ATF | -6.0 | ASTM D471 | |
135 ℃, 70 hr, in MIL-H-5606 | -17 | ASTM D471 | |
175 ℃, 70 hr, in Stauffer 7700 liquid | -16 | ASTM D471 | |
Volume change | ASTM D471 | ||
135 ℃, 70 hr, in Ford ATF | 7.0 | % | ASTM D471 |
135 ℃, 70 hr, in MIL-H-5606 | 19 | % | ASTM D471 |
175 ℃, 70 hr, in Stauffer 7700 liquid | 18 | % | ASTM D471 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Operating temperature | -7 to 232 | ℃ |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Rubber Classification | FEPM | ASTM D1418 | |
TR 10/50 | 7 | ℃ | ASTM D1329 |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |