| About |
|---|
| Features/Benefits: Color: White FDA compliant Low gas permeability Good cryogenic properties Limited wear and heat resistance Working Temperature Range: -268° to +260°C [-450° to +500°F]&& |
| Product Description | |
|---|---|
| Supplier | Saint Gobain |
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | Low odor |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.15 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696 | ||
| MD：26~200℃ | 1.3E-4 | 1/℃ | ASTM D696 |
| TD：26~200℃ | 1.5E-4 | 1/℃ | ASTM D696 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 50 to 65 | ASTM D2240 | |
| Tensile modulus | 386 | MPa | ASTM D638 |
| tensile strength | 27.5 | MPa | ASTM D1708 |
| Tensile strain | |||
| fracture | 300 | % | ASTM D1708 |
| Compression modulus | 558 | MPa | ASTM D695 |
| compressive strength | |||
| 1% strain | 8.27 | MPa | ASTM D695 |
| friction coefficient | 0.050 to 0.080 | ASTM D3702 | |
| Load deformation | |||
| 14 MPa | 10.0 | % | ASTM D621 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 24 hours |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |