| About |
|---|
| Formolene® E900 is a high molecular weight high density polyethylene (HMW-HDPE) resin designed for non-pressure pipe applications. Formolene® E900 is well balanced in overall physical properties and provides good stiffness for extrusion applications.&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High molecular weight |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | 0.040 | g/10min | ASTM D1238 |
| 190℃，21.6kg | 8.5 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| — | 400 | hr | ASTM F2136 |
| 10% non-ionic detergent | > 500 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 24.8 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 600 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -118 | ℃ | ASTM D746 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 15% Yield Stress, NCLS |
| 3. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |