Formolene® E927

About
Formolene® E927 is a high molecular weight grade of HDPE designed for high drawdown to produce thin films with good processing and physical properties. Formolene® E927 is well balanced in overall physical properties and provides good stiffness for thin gauge film applications. Formolene® E927 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications: T-Shirt Bags Trash Can Liner and Heavy Duty Bags Multi-Wall Bag Liners Merchandise Bags&&

About

Formolene® E927 is a high molecular weight grade of HDPE designed for high drawdown to produce thin films with good processing and physical properties. Formolene® E927 is well balanced in overall physical properties and provides good stiffness for thin gauge film applications. Formolene® E927 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications: T-Shirt Bags Trash Can Liner and Heavy Duty Bags Multi-Wall Bag Liners Merchandise Bags&&

Product Description
Supplier	fpc-tw
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good dissection,Food contact compliance,High molecular weight
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ASTM D1505
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.070	g/10min	ASTM D1238
190℃，21.6kg	12	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	15	µm
Secant modulus			ASTM D882
1% secant, MD: 15 µ m, blow molded film	814	MPa	ASTM D882
1% secant, TD: 15 µ m, blow molded film	1010	MPa	ASTM D882
tensile strength			ASTM D882
MD, fracture, 15 µ m, blow molded film	57.2	MPa	ASTM D882
TD, fracture, 15 µ m, blow molded film	49.6	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 15 µ m, blow molded film	280	%	ASTM D882
TD, fracture, 15 µ m, blow molded film	410	%	ASTM D882
Drop hammer impact
15 µ m, blow molded film	380	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD: 15 µ m, blow molded film	11	g	ASTM D1922
TD: 15 µ m, blow molded film	60	g	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Melting temperature	131	℃	DSC

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.