Formolene FORMAX® L71709H

About
Formolene FORMAX® L7 is a high strength linear low density polyethylene made using a gas-phase process. Film mechanical properties are significantly improved compared to competitive super hexene LLDPE film resins. Formolene FORMAX® L7 is formulated with slip and antiblock for use in high performance film applications offering excellent extrusion processing and outstanding impact strength and tear resistance. Films exhibit good optical properties. Formolene FORMAX® L7 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications: Industrial Packaging Industrial Liners Coextrusion Can Liners Consumer Trash Bags&&

About

Formolene FORMAX® L7 is a high strength linear low density polyethylene made using a gas-phase process. Film mechanical properties are significantly improved compared to competitive super hexene LLDPE film resins. Formolene FORMAX® L7 is formulated with slip and antiblock for use in high performance film applications offering excellent extrusion processing and outstanding impact strength and tear resistance. Films exhibit good optical properties. Formolene FORMAX® L7 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications: Industrial Packaging Industrial Liners Coextrusion Can Liners Consumer Trash Bags&&

Product Description
Supplier	fpc-tw
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Rigidity,Optical performance,Food contact compliance,Inoxidizability,Good tear strength,Copolymer,Hexene copolymers
Availabilitys	North America
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.90	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
tensile strength
TD, fracture, 25 µ m, blow molded film	29.6	MPa	ASTM D882
TD, yield, 25 µ m, blow molded film	11.2	MPa	ASTM D882
MD, fracture, 25 µ m, blow molded film	39.0	MPa	ASTM D882
MD, yield, 25 µ m, blow molded film	11.4	MPa	ASTM D882
Tensile strain
TD, fracture, 25 µ m, blow molded film	870	%	ASTM D882
MD, fracture, 25 µ m, blow molded film	700	%	ASTM D882
Drop hammer impact
25 µ m, blow molded film	400	g	ASTM D1709
tear strength
TD, 25 µ m, blow molded film	700	g	ASTM D1922
MD, 25 µ m, blow molded film	380	g	ASTM D1922

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.