Formolene® L63568

About
Formolene L63568 is a general-purpose rotational molding linear low density resin made using the BP Gas Phase Process™. The resin exhibits excellent ESCR and low temperature impact strength. The resin is NOT UV stabilized. Formolene L63568 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications: Toys Medium Tanks Playground Equipment Drums Agricultural and Chemical Storage Tanks&&

About

Formolene L63568 is a general-purpose rotational molding linear low density resin made using the BP Gas Phase Process™. The resin exhibits excellent ESCR and low temperature impact strength. The resin is NOT UV stabilized. Formolene L63568 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications: Toys Medium Tanks Playground Equipment Drums Agricultural and Chemical Storage Tanks&&

Product Description
Supplier	fpc-tw
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Weather resistance is good,Food contact compliance,low-temperature impact resistance,Hexene copolymers,High ESCR
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.935	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	6.8	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693A
10% non-ionic detergent, molded, F50	200	hr
100% non-ionic detergent, molded, F50	> 1000	hr

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, molding	18.6	MPa	ASTM D638
Tensile strain
Yield, molding	12	%	ASTM D638
Bending modulus
Compression Molding	689	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Low temperature impact molding (-40 ℃, 3.18 mm)	61.0	J	ARM

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, molded	50.0	℃	ASTM D648

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.