| About |
|---|
| F622W is a medium molecular weight PVC homopolymer suitable for extrusion applications. This product has good bulk density and excellent dry flow characteristics, making it desirable for dry blending applications where uniform feed rate to an extruder is important.&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Good liquidity,Homopolymer |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.51 | g/cm³ | ASTM D1895 |
| K-Value | 67.0 | ||
| pollutant | 15 | ||
| Particle size distribution | ASTM D1921 | ||
| 200 Mesh | 3.0 | % | |
| 40 Mesh | 100 | % | |
| Intrinsic viscosity | 0.93 | ASTM D1243 | |
| Relative viscosity | 2.20 | ASTM D1243 | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| ASTM Classification | GP4-15000 | ASTM D1755 | |
| Gel Count | 20.0 | Internal Method | |
| Residual Vinyl Chloride Monomer | ppm | Internal Method | |
| volatility | 0.15 | % | ASTM D3030 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |