| About |
|---|
| The AWS compounds have been designed for profile extrusions in indoor and non-weatherable applications and substrates for outdoor applications. They exhibit a natural color and exceptional processing properties for high rate profile extrusion.&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PVC, not specified |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,High liquidity |
| Availabilitys | North America,Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | 2410 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 41.4 | MPa | ASTM D638 |
| Bending modulus | 2410 | MPa | ASTM D790 |
| bending strength | |||
| yield | 68.9 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 160 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 71.0 | ℃ | ASTM D648 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |