| About |
|---|
| F-260 is a fine particle size PVC homopolymer plastisol blending resin. It combines excellent fusion characteristics, low plastisol viscosities as well as lot to lot uniformity. In combination with dispersion resin, F-260 has been successfully used in top coats, chemically blown foam, and various molding processes&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Low Viscosity,Homopolymer |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.57 | g/cm³ | ASTM D1895A |
| K-Value | 63.0 | ||
| Particle size distribution | ASTM D1921 | ||
| — | 97 | % | ASTM D1921 |
| — | 100 | % | ASTM D1921 |
| Intrinsic viscosity | 0.87 | ASTM D1243 | |
| Average particle size | 35 | µm | |
| Relative viscosity | 2.10 | ||
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| volatility | 0.50 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Coulter Counter LS230 |
| 3. Through 40 Mesh Screen, Method B |
| 4. Through 270 Mesh Screen, Method B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |