| About |
|---|
| 40% Glass Reinforced, Stable to heat, for Automotive applications&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PA 4T |
| Material Status | Commercial: Active |
| Features | Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.54 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | 1.7 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 14500 | MPa | |
| 120℃ | 12800 | MPa | |
| 150℃ | 9500 | MPa | |
| 160℃ | 8000 | MPa | |
| 180℃ | 6500 | MPa | |
| 200℃ | 5900 | MPa | |
| tensile strength | |||
| fracture | 220 | MPa | |
| Fracture, 120 ℃ | 165 | MPa | |
| Fracture, 150 ℃ | 125 | MPa | |
| Fracture, 160 ℃ | 110 | MPa | |
| Fracture, 180 ℃ | 95.0 | MPa | |
| Fracture, 200 ℃ | 84.0 | MPa | |
| Tensile strain | |||
| fracture | 2.2 | % | |
| Fracture, 120 ℃ | 2.4 | % | |
| Fracture, 150 ℃ | 3.6 | % | |
| Fracture, 160 ℃ | 4.5 | % | |
| Fracture, 180 ℃ | 5.6 | % | |
| Fracture, 200 ℃ | 6.0 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | 12 | kJ/m² | |
| 23℃ | 11 | kJ/m² | |
| Charpy Unnotch Impact strength | |||
| -30℃ | 60 | kJ/m² | |
| 23℃ | 65 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 330 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 320 | ℃ | ISO 75-2/A |
| Melting temperature | 335 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 to 130 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 320 to 340 | °C | |
| Barrel middle temperature | 330 to 350 | °C | |
| Barrel front temperature | 330 to 350 | °C | |
| Nozzle temperature | 340 to 370 | °C | |
| Processing (melt) temperature | 340 to 370 | °C | |
| Mold temperature | 80 to 200 | °C | |
| Injection speed | 中等偏快 | ||
| Back pressure | 0.500 to 3.00 | MPa | |
| Screw compression ratio | 2.5:1.0 | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |