| About |
|---|
| ForTii®Ace MX53T是高玻璃化温度,尺寸稳定的PPA,旨在取代需求高性能的金属结构部分，从-35°C到150°C,甚至在的各种化学环境下(油、道路盐、燃料、冷却剂等)依然保持其性能。ForTii®Ace MX53T含有50%玻璃纤维,其热稳定性能适用于汽车应用 |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PPA |
| Material Status | Commercial: Active |
| Features | Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.62 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 17300 | MPa | ISO 527-1-2 |
| 120℃ | 15600 | MPa | ISO 527-1-2 |
| 150℃ | 7400 | MPa | ISO 527-1-2 |
| tensile strength | |||
| — | 270 | MPa | ISO 527-1-2 |
| 120℃ | 160 | MPa | ISO 527-1-2 |
| 150℃ | 85 | MPa | ISO 527-1-2 |
| Tensile strain | |||
| fracture | 2.5 | % | ISO 527-1/2 |
| Fracture, 120 ℃ | 2.8 | % | ISO 527-1/2 |
| Fracture, 150 ℃ | 6 | % | ISO 527-1/2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| 10℃ / min | 320 | ℃ | ISO 11357-1/-3 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |