FORTIPRENE TPE 7116A45CO

About
CHARACTERISTICS Developed to meet the requirements of complex molds; Processable in conventional thermoplastics injection molding and extruder machines; Good adhesion to polyolefins; Product in natural color for parts that require pigmentation. INDICATION Injection mold of thin-walled parts; Injection mold processes where there is a need for high melt flow index; Injection molded parts or coinjection with polyolefins;

About

CHARACTERISTICS Developed to meet the requirements of complex molds; Processable in conventional thermoplastics injection molding and extruder machines; Good adhesion to polyolefins; Product in natural color for parts that require pigmentation. INDICATION Injection mold of thin-walled parts; Injection mold processes where there is a need for high melt flow index; Injection molded parts or coinjection with polyolefins;

Product Description
Generic	TPE
Material Status	Commercial: Active
Features	Good bond,Low moisture absorption
Availabilitys	Latin America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.970	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 3 seconds	45		ASTM D2240

elastic body	Nominal value	Unit	Test method
Tensile stress (100% strain)	1.10	MPa	ASTM D412
Tensile strength	5.00	MPa	ASTM D412
Tensile strain
fracture	> 600	%	ASTM D412

Process Conditions
Injection	Nominal value	Unit	Test method
drying temperature	80	°C
Drying time	> 2.0	hr
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	170 to 180	°C
Temperature in the middle of the barrel	180 to 190	°C
Front temperature of material barrel	190 to 200	°C
Nozzle temperature	190 to 200	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.