| About |
|---|
| Product Description | |
|---|---|
| Supplier | Nan Ya |
| Generic | PA66 |
| Material Status | Commercial: Negative |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific Gravity | 1.56 | ASTM D792 | |
| Molding Shrinkage | |||
| MD | 0.5 | % | |
| TD | 1.0 | % | |
| Melt Flow Rate | 26 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 1200 | kg/cm² | ASTM D638 |
| Elongation at Break | 2.4 | % | ASTM D638 |
| Flexural Strength | 1850 | kg/cm² | ASTM D790 |
| Flexural Modulus | 72000 | kg/cm² | ASTM D790 |
| Rockwell Hardness | 120 | R Scale | ASTM D-785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | 8.5 | kg-cm/cm | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting point | 262 | ℃ | DSC |
| HDT | |||
| 18.6 kg/cm2 | 240 | ℃ | ASTM D648 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistivity | 1E15 | ohm·cm | ASTM D257 |
| Dielectric Strength | 18 | kV/mm | ASTM D149 |
| Dielectric Constant | 3.2 | ASTM D150 | |
| Dissipation Factor | 0.02 | ASTM D150 | |
| Arc Resistance | 70 | sec | ASTM D495 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | V-0 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 80 | ℃ | |
| Drying Time | 4 | hr | |
| Rear Temperature -Zone 1 | 270 | ℃ | |
| Middle Temperature -Zone 2 | 275 | ℃ | |
| Nozzle Temperature | 280 | ℃ | |
| Nozzle Temperature | 285 | ℃ | |
| Mold Temperature | 85-95 | ℃ | |
| Injection pressure | 450-1000 | kg/cm2 | |
| Screw Speed | 180 | rpm | |
| Injection speed | 快速 | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |