| About |
|---|
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | PA66 |
| Material Status | Commercial: Negative |
| Features | Halogenated,Flame Characteristics,V-0 |
| Availabilitys | Latin America,North America,Europe,Africa & Middle East ,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
| Flame retardant level | |||
| 0.4 mm | V-0 | UL 94 | |
| 3.2 mm | V-0 | UL 94 | |
| Glowing wire flammability index | |||
| 0.8 mm | 960 | ℃ | IEC 60695-2-12 |
| 3.2 mm | 960 | ℃ | IEC 60695-2-12 |
| Igniting temperature of the hot wire | |||
| 0.8 mm | 775 | ℃ | IEC 60695-2-13 |
| 3.2 mm | 800 | ℃ | IEC 60695-2-13 |
| FMVSS flame retardant rating | SE | FMVSS 302 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 11000 | MPa | ISO 527-1,-2 |
| Tensile stress | |||
| Fracture, 5mm/min | 150 | MPa | ISO 527-1,-2 |
| Tensile strain | |||
| Fracture, 5mm/min | 2.5 | % | ISO 527-1,-2 |
| Ball hardness | |||
| 30s | 220 | MPa | ISO 2039-1 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1420 | kg/m³ | ISO 1183 |
| Shrinkage rate | |||
| TD | 0.3 – 0.6 | % | ISO 294-4 |
| MD | 0.6 – 0.9 | % | ISO 294-4 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 4.2 | % | ISO 62 |
| 23°C/50%RH | 1.2 | % | ISO 62 |
| Viscosity number | |||
| sulphuric acid | 145 | ml/g | ISO 307（PA） |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 8.5 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 220 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 230 | ℃ | ISO 75-2/B |
| Continuous use temperature | 130 | ℃ | IEC 60216 |
| Melting temperature | |||
| 20℃/min | 260 | ℃ | ISO 11357-1/-3 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Compared to the leakage tracing index | |||
| 50 drops | 600 | V | IEC 60112 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |